HALLOWEEN PUMPKIN for your 1:12 dollhouse miniature - YouTube
Video will open in a new window
[isdntekvideo]
miniLAND - The Center For Handcrafted Miniatures
is excited to be the exclusive seller for the 3G battery operated LED miniatures lights. No wiring needed!
All of miniLand's lights:
Are extremely simple to operate, with an on/off switch at the base.
Are super bright with a soft natural light
do not require any wiring or plugs!
Have a built-in Lithium watch battery (CR1632).
Our lights are designed for 1:12 and 1:6 scales (sizes specified in the product title). All ceiling and wall lights attach with a miniature disk magnet, which comes included with the lights.
Miniature 1:12 scale Dollhouse lights - How it made by miniLAND.ca - YouTube
Video will open in a new window
[isdntekvideo]
Installation:
Lighting your dollhouse is extremely simple with our battery operated lighting system.
Each light comes with its own battery and all you need to do is simply turn a switch on/off on the base of the light.
The base where the battery fits unscrews so batteries can be replaced easily and as needed.
Wall and ceiling lights also come with a magnet. Simply glue the magnet in the spot you wish to have your light, and the light piece will attach to the magnet with ease.
There is no need for the complexity of electrical tape and wiring.
Accessories:
miniLAND developed exclusive external power sources for the 3rd generation lights, which can be purchased separately. These include:
Power sources for a single light powered using a batteries box
Power sources for several lights powered using a batteries box
Power sources for several lights powered from an outlet.
External adapter kit for LED 3G battery operated miniland dollhouse miniature lights - YouTube
Video will open in a new window
[isdntekvideo]
DIY - instruction for external operation for multiple LED dollhouse miniatures lights - YouTube
Video will open in a new window
[isdntekvideo]
If you would like to create a high-end finish for your chandelier, take a look at our beautiful, handmade ceiling medallions.
Please note that all of miniLand's products contain small parts and are not suitable for children under 12
Questions and Answers:
Q: I can't find the magnet that comes with the light?
A: The magnet is attached to the base of the lamp. Looks for a small metallic disk in the center of the base of the lamp. Please note that only ceiling and wall lights come with magnets. Floor and tables lights can stand on their base and do not require a magnet.
Q: How should I glue the magnet to the wall?
A: We recommend using a 2 part clear epoxy for this job. You can use any other good quality glue that can glue metal to wood. We do not recommend using a double tape adhesive, since it will loose its tackiness after a short time and cause the magnet and lights to fall.
Q: How long does the battery last?
A: A new battery can last up to approximately 50 hours with a single LED light. The battery life will be shorter if there are multiple lights.
Q: My light is flicking, what should I do?
A: This is usually caused by a loose connection with the battery. Remove the battery and clean it with a dry cloth before placing it back.
If this happens to a lamp with a candle type lights, tighten the candle like a screw. You can also try switching the location of the candles.
Cir-Kit Concepts Dollhouse Miniature 2 Conductor Tape Wire 15' Roll - 0000423
This double conductor tapewire is the "heart" of all Cir-Kit wiring systems. From its introduction in 1976 to the present it has been the predominant method of dollhouse wiring. Its use creates a printed circuit type layout and completely eliminates the congested wiring found in conventional systems. A super strong adhesive, exposed by the removal of a peel away paper carrier, ensures a secure grip on any surface. Since the copper foils are sandwiched between two layers of transparent tape, the tape may be applied even over bare metal. The exposed transparent tape has a matte finish allowing easy application and retention of paint.
Several major improvements have been incorporated into the design and manufacture of the Cir-Kit Concepts' tapewire. The most significant is color coding of the copper foils. This new feature greatly simplifies the making of corners during the wiring process. Brass brads are installed only at the blue-to-blue and copper-to-copper overlap points, eliminating any possibility of short circuits at these locations. As great an idea as color coding may be, if the colors are too intense they will bleed through light wallpaper or paint and appear as unwanted ribbons of color. To ensure this doesn't happen, the one colored foil is made of a light pastel blue for easy masking.
Another problem that occurs with other, lesser quality brands of tapewire is "bubbling". This is a phenomenon that takes place once the tapewire is in place. As time passes, the transparent overlay begins to buckle causing ripples that eventually show through the wallpaper or paint coverings. Using a special manufacturing process, Cir-Kit Concepts has completely eliminated this problem. A tape run made today will appear as straight and true in a year as the day it was laid. The Cir-Kit Concepts' name is also embossed on the natural copper foil to identify it as the one and only Cir-Kit Concepts' tapewire product.
The main body of the tape is 5/8" wide with a total thickness of approximately .005". The copper foils will carry up to 5 amperes of continuous current.
Specifics
- Features: Handcrafted
- Scale: 1:12
- Brand: miniland
- Condition: New
- All returns accepted: Returns Accepted
- Return shipping will be paid by: Buyer
- Item must be returned within: 30 Days
- Refund will be given as: Money Back
- Restocking Fee: No